Pre-Treatment systems for wastewater from municipal, industrial and commercial sources

Pre-treatment removes materials that can be easily collected from raw wastewater before it damages or clogs pumps and skimmers of primary treatment clarifiers. Ecologix offers an extensive line of pre-treatment solutions made to extend the life of your wastewater treatment solution. See our products below, or call us for assistance in selecting the pre-treatment solution fit for your project needs.

Headworks for Grit

Grit Removal Unit

Grit screening prior to municipal wastewater treatment.

Pre-Treatment Unit

Pre-treating sewage before it enters a WWTP.

Oil Water Separators

Above Ground Oil Water Separators (ECOS)

ECOS above ground oil water separators remove free and mechanically emulsified oils at rates between 2 and 70 gallons per minute.

Below Ground Oil Water Separator (HQB)

Removes free oil droplets as small as 40 microns. Reduces effluent free oil concentration to <10 PPM. Great for auto shops, vehicle wash buildings.

SkimLoop Oil Water Separator

The SkimLoop Oil Water Separator (OWS) sets the industry standard for skimming and separating floating oils and solids from industrial fluids.

)

Bilge Oil Removal System (BORS)

Marine grade, US Coast Guard certified bilge oil separator. Can be deck mounted on a ship or used in a land installation.

OrganoClay

MCM-830P OrganoClay removes mechanically emulsified oil and grease, free oil and high molecular weight organic molecules. It is highly versatile, effective, and can be used in pre-treatment, post-treatment, or stand-alone processes in the separation of oily water.

MCM OrganoClay Cartridge Filters

MCM OrganoClay Cartridge Filters are engineered for the removal of dispersed, emulsified and dissolved hydro-carbons from aqueous solutions.

Cone Filters

Cone Filters for Wastewater Treatment

Cone Filters are used to catch and filter any type of debris from a waste stream.